Frequently Asked Questions

VisorProTech is a clear, invisible, anti-fog protective film engineered for hockey helmet visors. It takes scratches and impacts so your visor keeps its factory finish.

The film can be installed in under three minutes using our simple 4-step process: clean, wet, peel, and press. We recommend letting the visor dry for 24 hours for best results.

VisorProTech is precision-cut for the CCM FV1 Full JR/SR and the Bauer Concept 3 Full JR/SR. More models are coming soon.

Each 2-Pack includes two precision-cut protective films with anti-fog coating on both sides.

Tracked shipping is $19.99 per order. Shipping is automatically free on orders over $80.

Yes. On the shop page you can choose a quantity for each compatible visor model and add them all to one order.

Simply peel the worn film away from the visor. Clean the visor surface, then apply the new film following the 4-step install guide.

It is possible to remove the bubble by one of two methods. 1. Work the bubble to the edge of the film with the VisorProTech squeegee using moderate pressure. 2. Poke a small hole in the bubble allowing you to squeegee the remaining moisture/air out from behind the film. The film is self healing and the hole should not be noticeable.

In most cases the visor film is pretty durable and should install fine as long as it is not torn or excessively stretched.

The two-pack films are packaged facing each other to prevent scratching from the cardboard packaging. If micro scratches are noticed, using a bit of heat from a blow dryer may help it self-heal, taking the scratches/scuffs away.

VisorProTech is designed and made in Canada.